I bought a loom! It's an Ashford 20" Knitter's Rigid Heddle and I am having so mush fun! FitzGyver claimed my first finished piece, a short scarf (short because one of my warp threads broke and I didn't know how to fix it) in a bright turquoise (Mike's favorite color). I dyed commercial yarn for the warp and the weft was my own home spun ... Pics to come soon. My second piece is still on the loom; almost finished. This morning I'm spinning the yarn for the warp of my next piece ... some nice Corriedale Top that I bought last year from WC Mercantile on Etsy. I should be able to finish a couple hundred yards this morning ... and then I really need to get out into the garden, harvest and process the celery and get some fall veggies in the ground ... more to come ...
Deb
Homesteading In The Pacific Northwest
Sunday, August 19, 2012
Wednesday, July 25, 2012
Monday, July 23, 2012
Harvest Monday ... and Pickled Beets
I'm joining other bloggers over at Daphne's Dandelions as we share our weekly harvests...it's fun to see what others are harvesting and what they are cooking up with it...check it out!
The garden is producing more than we can eat now so I am busy canning, dehydrating and freezing. Yesterday I pulled some potatoes and carrots to go with our chicken piccata dinner ...
The garden is producing more than we can eat now so I am busy canning, dehydrating and freezing. Yesterday I pulled some potatoes and carrots to go with our chicken piccata dinner ...
I also pulled a bunch of my chioggia beets ...
and turned them into the prettiest pickled beets I've ever seen :)
I used the recipe on Cindy's (SB Canning) web site for the beets. You can find it here.
Enjoy!
Labels:
Canning,
Harvest Monday
Tuesday, July 10, 2012
A Tuesday Tutorial ... Drip Irrigation
With so much of the country experiencing drought conditions I thought now would be a good time to update my drip irrigation information. In April of 2011 I posted about the system I set up then. When we tore everything up last spring I updated the system and added some Dripworks components to the system.
Here is the system that goes to the raised beds coming off of a faucet next to the greenhouse ...
Here is the system that goes to the raised beds coming off of a faucet next to the greenhouse ...
I bought two of these timers, one for the greenhouse and one for the raised beds. This one works fine for the greenhouse, but I want one that will allow longer and more frequent watering for the beds. I'm going to order one of these instead (I need another one anyway for the terrace garden on the lake side of the house so this one will still find a home). After the timer a Y Filter is attached and then a 30 PSI pressure regulator followed by an Easy Loc Fitting (when Dripworks says that these are easier to use than compression fittings they are right!) Next the fitting is attached to the 1/2" tubing that goes to the beds. When we rebuilt the garden FitzGyver added water and power lines plus the 1/2" tubing to the beds ...
... Raindrip compression T fittings (here's a picture ... I bought mine at the local Ace Hardware) take the tubing from the main line to each of the beds where they are closed off and then attached to some 1/4" tubing (again, from Ace Hardware) using a hole punch and a barb connector...
... a 1/4" Vari-Flow Valve was then inserted ...
... allowing me to turn off the drip system to any of the beds that are currently not in use. 1/4" Emitter Tubing was then attached (I found some with 6" hole spacing at the McLendon's Ace Hardware in Belfair) and laid out on the surface of the beds. I'm using loop stakes to hold the tubing in place now instead of eye pins; I found it was easier to take the tubing up and then lay it back down when I amend and replant a bed....
A second barb fitting was used to attach some 1/4" tubing to the 1/2" line in the beds ...
... and then this tubing was run over to the tomato boxes and a 1 GPH Drip Emitter was attached (I will be burying these lines soon to eliminate trip hazards).
That's it for the raised beds ... now for the greenhouse ...
A timer was attached to the faucet and then a Y Filter followed by a 3 Way Hose Splitter.
A T fitting was attached to one of the hose outlets and then a pressure regulator and Easy Loc Fitting with 1/2" tubing going to the greenhouse bench.
Barb fittings attach the 1/4" tubing and drip emitters that go to the plant trays ...
Another pressure regulator and Easy Loc Fitting attaches a second section of 1/2" tubing ...
... and more 1/4" tubing with drip emitters are connected with barbs for each of the container plantings ...
... including the hanging baskets.
It really didn't take very much time or effort and I like knowing that I can leave for a few days and my garden will be automatically watered using a water saving system :)
Enjoy!
Labels:
Drip System,
Garden Projects,
Greenhouse,
Irrigation,
Tutorials
Subscribe to:
Posts (Atom)






